SVKM NMIMS Global University

List of laboratories in the Department

Academic Labs:

Electrical Engineering department has total 8program specific laboratories. Each lab is equipped with experiment setups required as per the syllabus. Care has been taken to illuminate the labs while maintaining the overall ambience. The labs are centralized air-conditioned. For accessing the internet, WiFi routers have been installed in each lab. Each lab has seating capacity of 30 students. Some other features of labs are Notice boards, Cupboards, Intercoms, First aid kits, Knowledge walls, Safety instructions, Dustbins etc.

Table 1: List of laboratories with technical man power

Sr. No.	Name of the Laboratory	No. of students per setup (Batch size)	Name of the Important equipment	Weekly utilization status (all the courses for which the lab is utilized)	Technical manpower support
Sr. No.	Name of the Laboratory	No. of students per setup (Batch size)	Name of the Important equipment		Name of the technical staff	Designation	Qualification
1.	Electrical Engineering Lab (EE –L1)	18	DELL OptiPlex 7410 PCs, Printer, MATLAB 2024a, MI Power v.10.0, Smart Board	100%	Mr. Jayesh Nana Patil	Laboratory Assistant	BE
2.	Electrical Engineering Lab (EE –L2)	18	Motor with break drum arrangement 1HP (3-phase and 1-phase), 3-Phase slip ring motor with break drum arrangement - 1HP, DC Shunt Motor - 1HP, 3-Phase Star Delta Starter – 10 HP (Manual and Automatic), Autotransformer starter, Transformer – (1-phase, 1 kVA with tapings), (3-phase, 3 kVA), Auto-transformer – (3-phase, 3 kVA), (1-phase, 1 kVA), Rotor Resistance starter for 3-phase slip ring induction motor-3 HP, Auto transformer (3-phase, 440V/15A), (1-phase, 270V/5A), (1-phase, 270V/10A), DC shunt motor alternator coupled set (Synchronizing setup) , Cut section of DC shunt machine - 1 HP, Coupled DC Shunt Motor-DC Series Generator set panel (Motor-5 HP, Generator-3 HP), (Motor-5 HP, Generator-5 HP), Coupled DC series motor - DC Series generator set panel (Motor-5 HP, Generator-5 HP), DC series motor with mechanical loading arrangement - 5 HP, Separately excited DC motor with flywheel - 5 HP, DC shunt motor with control panel - 5 HP, 1-phase transformer with tapings of 86.6% and 50% - 3 kVA, 3-phase transformer (Y-Y) - 3 kVA, Delta connected 3-phase squirrel cage induction motor - 5 HP, DC Supply unit thyristor controlled power supply with isolation transformer (230V/60 A), (230V/40 A),, DC Shunt motor Alternator coupled set synchronizing setup , Synchronous Motor Test set up-Motor-5 HP, Generator–3 kVA, Synchronous Motor Test set up, Motor - 5 HP,	38.89 %	Mr. Rahul Manohar Thakur	Laboratory Assistant	BE
3.	Electrical Engineering Lab (EE –L3)	18	DC High Voltage Tester, 10 KV 10 mA, Oil Test Kit, (0 – 60) kV AC, DC High Voltage Tester, 3 KV, Horn Gap Apparatus, Corona cage with Transformer (0-50 kV AC) , Inclined Plane Tracking And Erosion Test Setup as per IEC-60587/ASTM-D2303/ IS-9947, Insulation Tester, 30 KV 30mA	22.22 %	Mr. Rahul Manohar Thakur	Laboratory Assistant	BE
4.	Electrical Engineering Lab (EE –L4)	18	Transmission Line Training system, Power Analyser, Simulation of Generator protection kit , Static OC Relay Test Kit, Static OV Relay Test Kit, Electro Mechanical IDMT OC Relay Test Kit, Negative Phase Sequences Relay Test Kit with Panel, Protection of fuse and MCB, Differential Protection Trainer for three phase Transformer	66.66 %	Mr. Jayesh Nana Patil	Laboratory Assistant	BE
5.	Electrical Engineering Lab (EE –L5)	18	PCB Prototype Machine NVIS 72, HP 200 G3 AIO PCs, Power Quality Analyser PQ3100, Cathode Ray Oscilloscope 30 MHz, Function Generator 3 MHz, Power Supply (Dual) Variable – 32V, 2 A, Single Phase Digital Energy Meter 240 V 5 - 30 A 30 A	55.55 %	Mr. Rahul Manohar Thakur	Laboratory Assistant	BE
6.	Electrical Engineering Lab (EE –L6)	18	SCR Gate Triggering ( Turn ON Methods Trainer) , JFET Characteristics , 1-phase Full Wave Half Controlled Bridge Rectifier using SCR, 1-phase Half Wave Half Controlled Rectifier Using SCR, SCR Parallel Inverter , Light Dimmer Using TRIAC , Dual Trace Oscilloscope 30 MHz , Study of MOSFET, IGBT, GTO, SCR, Triac, Diac Characteristics , Single phase half wave and bridge rectifier (uncontrolled), Single phase fully controlled converter, 3-phase PWM inverter (microcontroller based) , Buck, Boost & Buck-Boost converter, Study of ramp comparator firing circuit , 1-phase HW & Half control convertor with 1 HP PMDC Motor, 1-phase FW & Full controlled convertor Bridge type with 1 HP PMDC Motor, Speed control of chopper motor controller with 1 HP PMDC Motor, 3-phase Induction Motor controller using PWM Inverter,	22.22 %	Mr. Pankaj Navanitlal Bhavsar	Laboratory Assistant	Diploma
7.	Electrical Engineering Lab (EE –L7)	18	Temp Measurement using RTD Kit , Digital Earth Tester, Auto compute LCR Q-meter, Theorem and Kirchhoff’s Law Trainer kit , Series and Parallel Resonance kit	38.89 %	Mr. Pankaj Navanitlal Bhavsar	Laboratory Assistant	Diploma
8.	Electrical Engineering Lab (EE –L8)	18	8 channel ADC/DAC Interfacing Kit, Dual channel DAC/ADC Interfacing Kit , Microprocessor Kit-8085, 8051 LCD Interfacing board, Stepper Motor Driver Kit, Boolean expression using logic gates, Half & Full Adder and Subtractor, BCD to Excess 3 Verification Kit, 8:1 multiplexer and 1:8 demultiplexer, MS JK Flip-flop Kit, Dual trace Oscilloscope 30 MHz, Multi-wave signal generator 3 MHz, RF Tuned Amplifier, Transformer Coupled Amplifier, Push Pull Amplifier Model, Analog & Digital Trainer Kit,	38.89 %	Mr. Pankaj Navanitlal Bhavsar	Laboratory Assistant	Diploma

Lab Name: Electrical Engineering Lab (EE –L1)

Area: 66.26 sq.m

This lab provides a platform to students to enhance their programming and simulation skills.
Lab is equipped with required number of computers and software to provide hands on experience for each individual student.
This lab focuses on the design of electrical networks and power systems using software like MiPower and MATLAB/Simulink.

Lab Name: Electrical Engineering Lab (EE –L2),

Area: 72.80 sq.m

This lab focuses on teaching students about the characteristics and operation of DC and AC machines.
This lab offers students experimental and hands-on experience, enabling them to delve into the detailed study of the characteristics and operational aspects of electrical machines.

Lab Name: Electrical Engineering Lab (EE –L3)

Area: 66.49 sq.m

Gain fundamental understanding of high voltage concepts, including dielectric material behaviour and breakdown mechanisms.
Perform high voltage tests on materials to evaluate their performance

Lab Name: Electrical Engineering Lab (EE –L4)

Area: 66.49 sq.m

This lab emphasizes enhancing knowledge of power system fundamentals and analysis.
Gain hands-on experience with various types of protection equipment commonly employed in power systems.

Lab Name: Electrical Engineering Lab (EE –L5)

Area: 66.49 sq.m

This laboratory serves as a platform for students to undertake research-based projects under the supervision of faculty members.
The facility has been utilized by B.Tech students for their project and research work.
The outcomes of the projects contribute to publications in various conference proceedings, both at national and international levels.

Lab Name: Electrical Engineering Lab (EE –L6)

Area: 66.49 sq.m

This lab aims to acquaint students with the characteristics of power semiconductor switching devices and their applications in rectifiers, AC voltage controllers, inverters, and choppers.
It offers a platform to explore the operation and characteristics of power electronic converters utilized in electric drives.

Lab Name: Electrical Engineering Lab (EE –L7)

Area: 66.49 sq.m

Validate theoretical concepts and theorems learned in lectures through practical experimentation.
The lab emphasizes enhancing students' knowledge of the usage of various electrical and electronics measuring instruments.

Lab Name: Electrical Engineering Lab (EE –L8)

Area: 66.49 sq.m

Students gain an understanding of the basic operation of microprocessors and microcontrollers architecture, along with fundamental programming skills in assembly language.
Study the various characteristics of different types of amplifiers, including operational amplifiers (Op-Amps).
Introduce students to the basic concepts of digital logic gates and guide them in implementing logic functions using these gates.

Intercom facility

Dustbin facility

Notice Board

Cleaning staff cleaning the laboratory

Unique identification number (Asset Code) marked on the equipment

Cupboard facility in laboratory for students belongings

Knowledge wall

Wide White Boards

Project Based Lab:

A project laboratory is established in the department to provide the support for project and research development.
The laboratory has computer systems with software support. It facilitates computer based hardware interfacing for project development.
This laboratory is used by the students for mini projects and final year major projects.

Table 2:List of major facilities available in the project laboratory

Name of Laboratory	No. of Students	Major facilities/equipment /software available	Utilization
Electrical Engineering Lab (EE – L5)	Final Year: 62 students Third Year: 61 students Second Year: 68 students	Network Analyser	Signal analysis
		PCB Prototype Machine	Hands-on experience to design and fabricate custom PCBs tailored to their mini projects
		Function Generator	To generate signals of different amplitude and frequencies
		Cathode Ray Oscilloscopes	To observe signal behaviour and characteristics
		MATLAB	Programming and simulation in multi-disciplinary fields.
		Mi Power	Able to learn about power system analysis and design.
		Lab utilization before and after working hours	On prior request and permission, the students can operate project lab beyond the college hours for the convenience of the students.
		TINA software	Simulate electronic circuits before implementing them on a PCB so as to identify errors, optimize designs, and ensure the functionality of the circuit before fabrication.

Computing Facility available at the department:

Department of electrical engineering has a dedicated computer lab. The details are as follows:

No. of systems: 25
System Specifications: DELL OptiPlex 7410 PCs (Intel core i5 13th generation, 8GB RAM, 500GB SSD)
No. of routers: 01
No. of printers: 01
Software: MI Power v.10.0., MATLAB Latest version (Centralized Online License)
Other facilities: Senses Board, Intercom, Notice board etc.

Furthermore, 5 computers are also available in EE-L4 and EE-L5 to offer computing facilities.